E-505.00 LVPZT Piezo Amplifier Module

  • 200 W Peak Power
  • Output Voltage Range -20 to +120 V

E-505.00 is an amplifier module for Low Voltage PZTs. It can output and sink a peak current of 2000 mA and an average current of 300 mA. E-505.00 can be operated in 2 ways:

 

    • Manual operation

The output voltage can be set by a 10-turn, DC offset potentiometer in the range of 0 to 100 Volts.

 

    • External operation

Output voltage is controlled by an analog signal applied to the BNC input ranging from -2 to +12 Volts. Multiplying by the gain factor of 10, an output voltage range of -20 to +120 Volts results. The DC offset potentiometer allows for a continuous variation of the input voltage range between -2 V to +12 V and -12 V to +2 V.

For computer controlled operation, an E-515, 16 bit DAC Interface/Display Module can be used (requires E-500/E-501 chassis). For frequency response with selected LVPZTs see graph below.

E-505.00 is not a stand alone system. It requires the E-500/E-501 chassis with integrated power supply to function as an amplifier. A 32 pin connector is used to interface with the E-500/E-501 chassis.

 

ORDERING INFORMATION:
E-505.00 LVPZT Amplifier Module, -20 to +120 V

 

TECHNICAL DATA: E-505.00

Function

power amplifier

Channels

1

Maximum output power

200 W

Average output power

30 W

Peak output
current < 5 ms

2000 mA

Average output
current > 5 ms

300 mA

Current limitation

short-circuit proof

Voltage gain

10 ±0.1

Polarity

positive

Control input voltage

-2 to +12 V

Output voltage

-20 to 120 V

DC offset setting

0 to 100 V
with 10-turn pot.

Input impedance

100 kW

Control input sockets

BNC

PZT voltage output
socket:

LEMO ERA.00.250.CTL

Dimensions

one 14T slot wide,
3H high

Weight

0.9 kg

Operating voltage

requires E-530/E-531
power supply
(E-500/E-501 system)

 

 

This is a legacy product that may have limited availability or may have been replaced. Ask a PI engineer for an equivalent new model.

Back to Overview