- Travel Range to 18 mm
- All-Stainless-Steel Construction
- XY and XYZ Multi-Axis Translation Stage Combinations
- High Resolution to 0.1 µm
- Optional PiezoMike Piezo Motor for 10 nm Resolution
M-105 and M-106 are micrometer driven high resolution linear translation stages with a travel range of 18 mm and 5 mm, respectively. The carriage is spring preloaded against the micrometer tip for excellent repeatability and elimination of backlash. M-105 and M-106 precision linear stages are available in one, two or three axis configurations. Precision crossed roller bearings guarantee straightness of travel of better than 2 µm. M-106 is equipped with a differential micrometer drive providing resolution of 0.1 µm. If longer travel is required the M-126 motorized precision translation stage is available.
A higher performance multi-axis translation stage with precision closed-loop motors and closed-loop multi-axis piezo nanopositioning stage is shown below:
Versions with PiezoMike piezo motor drive provide additional 30 µm fine range for remotely controlled ultra-high resolution (e.g. scanning or tracking). More information on piezo motor actuators.j
The vertical stage in the multi-axis XYZ stage assembly supports the load through the micrometer spindle (not the preload springs) for excellent stability.
ORDERING INFORMATION:
M-105.10 Precision Translation Stage, 18 mm
M-105.11 Precision Translation Stage, 18 mm w/ Lockable Micrometer
M-105.20 XY Precision Translation Stage, 18 mm
M-105.30 XYZ Translation Stage, 18 mm
M-105.1P Precision Translation Stage, 18 mm, PiezoMike Drive
M-105.2P XY Precision Translation Stage, 18 mm, PiezoMike Drive
M-105.3P XYZ Precision Translation Stage, 18 mm, PiezoMike Drive
M-106.10 Precision Translation Stage, 5 mm, Differential Micrometer
M-106.20 XY Precision Translation Stage, 5 mm, Differential Micrometer
M-106.30 XYZ Precision Translation Stage, 5 mm, Differential Micrometer
OPTIONS:
M-009.10 Z-axis Mounting Bracket for Vertical Mount of M-105/6
M-009.20 Mounting Bracket for Mounting P-280 PZT NanoPositioners or F-010 Fiber Holders
M-009.30 Z-axis Mounting Bracket for Vertical Mount of M-105/6 Stages on PI Standard Hole Pattern
TECHNICAL DATA: | |||||
Models | M-105.10 | M-105.1P | M-106.10 | Units | <link>Notes |
Travel range | 18 | 18 | 5 | mm | |
PZT fine travel range | - | 30 | - | µm | |
Min. incremental motion (PZT drive) | - | 0.01 | - | µm | A4 |
Min. incremental motion (micrometer drive) | 1 | 1 | 0.1 | µm | A4 |
* Backlash | 2 | 2 | 2 | µm | |
Straightness | 2 | 2 | 2 | µm | |
Flatness | 2 | 2 | 2 | µm | |
Max. normal load capacity | 10 | 10 | 10 | kg | B1 |
Max. push/pull force | 20 / 4 | 20 / 4 | 20 / 4 | N | B2 |
Max. lateral force | 4 | 4 | 4 | N | |
Drive | M-626.00 | P-854.00 | M-653.00 | ||
Micrometer pitch | 0.5 | 0.5 | 0.4 / 0.02 | mm/rev. | |
Weight | 0.32 | 0.38 | 0.33 | kg | |
Material | N-S | N-S | N-S | L | |
Recommended PZT driver | - | A, C, G | - | M |
* the PZT drives are backlash free
This is a legacy product that may have limited availability or may have been replaced. Ask a PI engineer for an equivalent new model.