E-507.00 HVPZT Piezo Amplifier Module

  • 50 W Peak Power
  • Output Voltage Range 3 to -1100 V & Bipolar

E-507.00 is an amplifier module for High Voltage PZTs. It can output and sink a peak current of 50 mA and an average current of 13 mA. E-507.00 can be operated in 2 ways:

 

    • Manual operation

The output voltage can be set by a 10-turn, DC offset potentiometer in the range of -3 to -1000 Volts.

 

    • External operation

Output voltage is controlled by an analog signal applied to the BNC input ranging from 0 to 11 Volts. Multiplying by the gain factor of -100, an output voltage range of -3 to -1100 Volts results. The DC offset potentiometer allows for a continuous variation of the input voltage range between 0 V to +11 V and -11 V to 0 V.

For computer controlled operation, an E-515 16 bit DAC Interface/Display Module can be used (requires E-500/E-501 chassis). For frequency response with selected HVPZTs see graph below.

E-507.00 is not a stand alone system. It requires the E-500/E-501 chassis with integrated power supply to function as an amplifier. A 32 pin connector is used to interface with the E-500/E-501 chassis.

 

ORDERING INFORMATION:
E-507.00 HVPZT Amplifier Module, -3 to -1100 V

TECHNICAL DATA: E-507.00

Function

power amplifier

Channels

1

Maximum output power

50 W

Average output power

13 W

Peak output current < 50 ms

50 mA

Average output current > 50 ms

13 mA

Current limitation

short-circuit proof

Voltage gain

-100 ±1, +100 ±1 (selectable)

Polarity

negative/positive/bipolar (jumper selectable)

Control input voltage

0 to +11 V, 0 to -11 V (jumper selectable)

Output voltage

-3 to -1100 V
(-780 to +260, -550 to +550, -260 to +780, +3 to +1120 V, jumper selectable)

DC offset setting

-3 to -1100 V with 10-turn pot.

Input impedance

1 MW

Control input sockets

BNC

PZT voltage output sockets

LEMO ERA.0A.250.CTL

Dimensions

one 14T slot wide, 3H high

Weight

0.75 kg

Operating voltage

requires E-530/E-531 power supply
(E-500/E-501 system)

 

 

This is a legacy product that may have limited availability or may have been replaced. Ask a PI engineer for an equivalent new model.

Back to Overview